TRWinProg is a Windows PC program for programming of TR devices (if not programmed by bus / industrial ethernet directly). This means that all TR product lines such as rotary encoders, linear encoders, laser measuring devices, transformation measuring systems, displays with interfaces like Analog, SSI, ISI etc. Can be programmed with one software.

TRWinProg compatible devices are marked with the label on the left. System requirements: • 80-486 platform or higher • approx. 40 MB hard disk space • 32 MB RAM • CD-ROM drive • additional free COM interface or USB interface • Windows 95®/98®/Me® or • Windows NT 4® / 2000® / XP® / Windows 7® / Windows 8® / Windows 10®. Chart 5011 Latest Edition Of Internet.

EPROG W32 is a PC program for serial programming of position measuring devices under Windows operating systems: • Windows 95®/98®/ME® • Windows NT4®/2000®/XP® Data interchange between the PC and the measuring device is carried out via one of the serial V.24 interfaces with 115 kbps. It is necessary to plug on the PC adapter for electrical isolation and conversion of the signal to RS485 which extends the range to max.

Programming interface / software EPROG is no more supported for new devices. This information is only for documentation of older, already installed devices (see ).

SP2 for PL&v4.5 can not install without PL7 v4.5.. Need any more convincing? Try for yourself, on your own computer, with your own files: Click Here To Download Our Free 15-Day Trial Edition (No questions asked.

EPROG is a PC program for serial programming of position measuring devices. An IBM-compatible PC is required. The processor must be at least a 10 MHz 8088 processor or a 6 MHz 8086 processor and the operating system must be at least MS-DOS 3.0.

The program also runs in the DOS box of Windows 3.1 or higher versions, then however at least a 486DX2/66 processor must be used. Castlevania Adventure Rebirth Wii Download. Data interchange between the PC and the measuring device is carried out via one of the serial V.24 interfaces with 115 kbps. It is necessary to plug on the PC adapter for electrical isolation and conversion of the signal to RS485 which extends the range to max. Programming interface / software EPROG is no more supported for new devices. This information is only for documentation of older, already installed devices (see ). LT-Prog is a Windows PC program for programming of transformation measuring systems. Data interchange between the PC and the measuring device is carried out via one of the serial V.24 interfaces with 115 kbps.

It is necessary to plug on the PC adapter for electrical isolation and conversion of the signal to RS485 which extends the range to max. System requirements: • 80-486 platform or higher • approx. 5 MB hard disk space • 16 MB RAM • CD-ROM drive • additional free COM interface • Windows 95®/98®/Me® or • Windows NT 4® / 2000® / XP®.

Hardware • Processor:Personal Computer with a 333 MHz (2000 SP4/XP), 800 MHz (Vista), 1 GHz (Windows 7, Windows 8 and Windows 10) or higher processor (CPU) clock speed recommended; Intel Pentium/Celeron family or AMD K6/Athlon/Duron family, or compatible processor recommended • Memory:128MB (512MB recommended) for 2000 SP4/XP; 512 MB (1 GB recommended) for Vista, 1 GB (2 GB for 64 bit) for Windows 7, Windows 8 and Windows 10 • Storage:150MB free hard-disk space • Video:SVGA 1024x768 pixels resolution. (1280x1024 pixels resolution recommended) • Other: 9-pin serial port, USB port or Ethernet port for project transfer to PLC (USB port communications also requires USB-to-serial converter. Note: USB-to-serial convertor does not support XP Mode of Windows 7.).