Release Date: May 08, 2014 2013 MR1 Service Pack 3 Fixes and Improvements: Added the following reporting parameters: • FlipCROView method: Flips the CAD Reporting Object (CRO) either horizontally or vertically. • FlipCROViewByAxis method: Flips the CRO view along the axis passed. • Offset property: Returns/Sets via point data object the Offset location of the CAD Reporting Control.

• ScaleFactor property: Returns/Sets via a double the scaling factor of the CAD Reporting Control. A value of 1.00 = 100%. • Rotation property: Returns/sets via dmis matrix the transformations/rotation on the CAD Report Control.

PCDMIS® Alignment Question. December 20th, 2017 03:56 PM Go to last post. 5,209, 50,652. CMM Hardware. CMMs, sensors, fixtures and guns. Mitutoyo® Vibration near the CMM. By meathelmet. December 20th, 2017 01:14 PM Go to last post. 1,022, 10,616. Vision Systems. All non-contact systems such as.

• Fixed an issue where the Specify theos check box in the Construct Point dialog box (Insert Feature Constructed Point) was selected after it was cleared and an Inspection Plan (IP) was imported. • Fixed an issue where the features in a GROUP / ENDGROUP command block did not get deleted in Command mode when either the GROUP or ENDGROUP command was selected and then Delete was pressed. To delete the GROUP / ENDGROUP group command and its features in Command mode, ensure that you do the following: • Hide all the features in the group.

• Select the GROUP and ENDGROUP commands (ensure that you select both commands). • Press Delete. • Fixed an issue where the values in the Position axis did not match the values on the PC-DMIS report when File Export Generic was selected to export a generic text file after the measurement was completed. • Fixed an issue where the ID of a VWMP feature that was referenced in a construction or dimension did not update when the ID was changed.

• Fixed an issue where PC-DMIS stopped working when the F9 key was used to edit a COP/DATA command in the Edit window. • Fixed an issue where the Z value for an RMEAS command was incorrectly set to NONE when an IP was imported and a laser probe was active. • Fixed an issue where the radius for a generic circle was divided by two when it was entered in the Edit window, and the size was set to radius instead of diameter. • Fixed performance issues when the ANALYSISVIEW command was executed in the Edit window. • Fixed an issue where the name of an exported file was replaced with the full path of the last file that was entered when the part program was reopened. • Fixed an issue where the 'Do you want to update nominal of related dimensions?'

Message appeared when the Create button was selected in the Auto Feature dialog box (Insert Feature Auto) even though the feature did not have any dimension-related information. • Corrected the tabbing order in the Pattern Offsets dialog box (Edit Pattern). When the Tab key is pressed in the Angle box, the cursor now moves to the Number of times to offset box.

When the Tab key is pressed in this box, the focus moves to the Use default prefix check box. Pressing Tab again moves the focus to the OK button. • Fixed an issue where PC-DMIS crashed when File Import CATIA was selected and a hexblock with embedded GD&T symbols was imported; the Toggle GDT Items option on the Graphic View toolbar, and the GDT Selection Mode option on the Graphic Modes toolbar, were enabled; a callout was selected in the Graphic Display window (View Graphic Display Window); and then the Xact Measure GD&T dialog box was closed. • Fixed an issue where the values for the HIT/BASIC command changed incrementally each time F9 was pressed for a FEAT/CIRCLE command, the Regenerate hit targets check box in the Measured Circle dialog box was selected, and then the OK button was selected. • Fixed an issue where the constructed features for Arm 2 changed when, for Arm 1, the F9 key was pressed for a FEAT/CIRCLE command, a nominal value in the Measured Circle dialog box was changed, the Regenerate hit targets check box was marked, the OK button was clicked, and then either Yes or No was clicked for the 'Do you want to update nominals of related dimensions?'

• Fixed an issue where PC-DMIS sent the probe type for Arm 1 to the controller instead of the probe type for Arm 2 when the probe was changed to Arm 2. • Fixed an issue where a probe collision occurred when a part program with a tool change operation was manually stopped.

• Fixed an issue where the probe collided with the part when a recall alignment ID for an ALIGNMENT command was missing, and the warning message indicating that the ID was missing did not appear. • Fixed an issue where PC-DMIS crashed when a part program with an auto circle and location dimension was opened, File Reporting New Custom Report was selected, a location was added to the custom report, and then the report's 'Commands' property for the PCDMIS Command Objects check box was clicked. • Fixed an issue where the Dimension Info box in a custom report did not get updated during part program execution. • Fixed an issue with the Angle dimension where PC-DMIS recalculated the measured angle to the wrong quadrant when the evaluated angle from the Y axis or line to line and nominal angle was slightly over 90 degrees (such as 90.5). • Fixed an issue where the I++ Server requested a manual probe change instead of a DCC probe change when it received a ChangeTool command and the probe changer contained a probe.

• Fixed an issue where the import and serialization of IGES files took an unacceptable amount of time compared to PC-DMIS version 2010 MR3. • Fixed an issue where a Location dimension reporting a minimum inscribed circle calculation was incorrect after the part program was executed. • Fixed an issue where nominal values may have been incorrect for a plane-line-point alignment (with CAD) when the points were measured offline using a reflector, and the Find Nominals From CAD Mode button on the Probe Mode toolbar (View Toolbars Probe Mode) was enabled.

• Fixed an issue where IJK vectors did not appear in the external file during the EXPORT operation for a pointcloud (File Export Pointcloud XYZ). • Fixed an issue where a 'DLL Failed to Load Interfac.dll' error message appeared when PC-DMIS was upgraded for a LEICA Tracker. • Fixed an issue where the Execution dialog box (File Execute) stayed open when a part program with a CMS probe for a laser auto feature that was directly measured offline was executed. • Fixed an issue where PC-DMIS modified the XYZ target values for laser auto features when an alignment was modified.

• Fixed an issue where 'out of volume' errors appeared when a CMS laser probe was auto-centered in inches. • Fixed a CMS calibration issue where a CMS laser with a 90 degree adapter positioned at A-90 or larger could not be calibrated due to excessively large clearance moves during calibration. • Fixed an issue where the accuracy of a mapped wrist was incorrect when a matrix for a wrist with a CMS 106 configuration was created. • Fixed an issue where the 'CAMERA:NONE' message appeared in the Live View window in a DC environment when PC-DMIS Vision was configured with a CMM-V probe and was changed to use a touch trigger probe (TTP) or scanning probe, and then was changed back to a CMM-V probe.

• Fixed an issue where PC-DMIS Vision stopped working in online mode each time File Close or File Exit was selected. • Fixed an issue where PC-DMIS deleted commands in the Edit window when a part program was partially executed and then No was selected for the 'Equally space the hits' and 'Make this ID as default' messages. • Fixed an issue where PC-DMIS stopped working when the Report window was opened (View Report Window), the Text and CAD template was selected on the Reporting toolbar, the Edit Object item on the shortcut menu was selected for a CadReportObject with only one distance dimension, the At two features for distance check box in the Label Layout Wizard was selected, and then the wizard's OK button was selected. Fixed these laser wrist mapping issues: • When F9 was pressed on an Arm 2 LOADPROBE command in the Edit window, PC-DMIS incorrectly marked the Use wrist map if available check box in the Probe Utilities dialog box (Insert Hardware Definition Probe) even though the Arm 2 probe was not mapped.

• PC-DMIS incorrectly used 90 degrees as the maximum and minimum wrist values for angle A instead of the values in the probe file. • When the laser wrist mapping process was interrupted, PC-DMIS incorrectly calculated the number of angles needed to complete the process. • When the laser wrist mapping process was interrupted, PC-DMIS continued the process from an incorrect ABC angle instead of the angle at which the process was interrupted. • After a successful wrist mapping process, noncalibrated angular positions instead of self-calibrated angular positions were incorrectly added to the probe file for a mapped probe.

Indian Classical Tabla Mp3 Free Download. (Topic ID 16101-703). Things 2 Mac Keygen Generator.